D-Link DSL-2640U User Manual page 103

DSL-2640U Wireless N 150 ADSL2+ Modem Router
User Manual
Later you will be able to add wireless devices to the WLAN by pressing the WPS/WLAN button of
the router.
1. Select the PBC method in the software of the wireless device that you want to connect to the
router's WLAN.
2. Click the relevant button in the software or press the WPS button on the cover of the
wireless device that you want to connect to the WLAN.
3. Press the WPS/WLAN button of the router and immediately release it.
After clicking the button the WPS LED blinks. If the wireless device has been successfully
connected to the WLAN, the LED stops blinking and lights green.
Page 103 of 149
Configuring via Web-based Interface