Creating Ethernet Wan Connection - D-Link DSL-2640U User Manual

DSL-2640U Wireless N 150 ADSL2+ Modem Router
User Manual

Creating Ethernet WAN Connection

Prior to creating an Ethernet WAN connection, specify a LAN port that will be used as the WAN
port (see the Interface Grouping section, page 107).
Figure 63. The page for creating a new connection. The General settings and Ethernet sections.
Parameter
Connection Type
Interface
Name
Enable
Direction
General settings
A type of network protocol to be used by the connection. Available
values:
PPPoE
•
Static IP
•
Dynamic IP
•
Bridge.
•
Select the value corresponding to the LAN port specified as the
WAN port.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 83 of 149
Configuring via Web-based Interface
Description