Error Indication - Kyocera FS FS-1300D Operation Manual

Indicator
5-8
Meaning
The toner is running low.
The toner has run out.
Unable to print with the specified
resolution due to insufficient
memory.
CF card is not formatted.
Specified file not found.
The current printing cannot be
continued.
Unable to print due to insufficient
memory.
Unable to print as the data is too
complicated.

Error Indication

If the indicators light or flash repeatedly in manners not described
above for normal or maintenance indication, a service error has
probably occurred. Turn the printer off by the power switch, wait 5
seconds and then turn the printer on again. This may clear the error.
Even if the error is not cleared, contact your service technician.
Remedy
Have a new toner container ready.
Replace with a new toner container.
After replacing the toner container,
clean the inside of the printer.
Add the expansion memory to the
printer.
Format the CF card.
Press [GO] to continue processing.
Press [Cancel] to cancel processing.
Press [GO] to continue processing.
Press [Cancel] to cancel processing.
Install the expansion memory in the
printer. Press [GO] to continue
processing. Press [Cancel] to cancel
processing.
Press [GO] to continue processing.
Press [Cancel] to cancel processing.
Troubleshooting