Indicators - Kyocera FS FS-1300D Operation Manual

Indicator
Ready (Green)
Data (Green)
Jam (Amber)
Paper (Amber)
Attention (Amber)
Toner (Amber)
Machine Parts

Indicators

There are six indicators located on the top right of the printer. The
indicators are used to identify the status of the printer at any time. To
identify the printer status, check the indicators on the printer and then
refer to the table below.
Status Meaning
Lit Indicates online status (printing is possible).
Fast Flashing Offline status. You cannot print, but the printer can receive data.
Slow Flashing The printer is in sleep mode.
Off The printer has stopped because an error occurred.
Lit The printer is processing data or is accessing to memory.
Fast Flashing The printer is receiving data.
The printer is not processing data.
Off
Lit A paper jam has occurred or the cassette is not inserted properly.
Off The printer status is normal.
Lit The paper has run out when printing.
The specified cassette or paper feeder has no paper at Ready
Fast Flashing
status. The cassette is not inserted properly.
Off The printer status is normal.
Lit An error has occurred because the top printer cover is open.
While an optional paper feeder (PF-100) is installed and the
feeder is selected as a paper source, the paper cassette of the
main unit (CASS1) is not installed correctly.
The warning status other than Jam, Toner, Paper, and
Fast Flashing
Attention.
Off The printer status is normal.
Lit The printer has stopped because the toner is exhausted.
Fast Flashing The toner is running low.
Off The printer status is normal.
Note
Status Monitor (software bundled with the KX driver) will provide
more detailed information about the printer status.
For other combinations of the six indicators, call for service.
1-5