Let’s Start The Installation - InSinkErator Hot-1 The Installation, Care And Use

Let's start the installation
1
If you have a spray unit like this one
A
on your kitchen sink, the hole is per-
fect for mounting your Hot-I Dispenser.
Now pull the spray head and hose
C
entirely out of the hole. Then plug
the faucet tube opening with either a 1/8
inch plug or 1/4 inch cap (not supplied).
B
spray hose from the bottom of the faucet.
PLUG
OR
CAP
D
spray hole. If you don't have enough
room for an ordinary wrench, you may
need the basin wrench.
FIRST, BE SURE FAUCET IS
TURNED OFF. Then unscrew the
Use a basin
wrench if you
don't have room
for an ordinary
wrench.
Next, remove the nut from the
bottom of the washer that is in the