Blowing Out - Miele S 560 Operating Instructions Manual

Operation

Blowing out

(depending on model)
The adapter is used to attach the suc-
tion hose connector to the blower con-
nection socket so that the vacuum
cleaner can be used to blow out air,
e.g. for dusting off multi-layered radia-
tors and blowing dust out of inaccessi-
ble corners so that it can be vacuumed
up. It can also be used to blow out the
suction hose if it gets blocked.
^ Press the release button for the dust
compartment lid and raise up the lid
up as far as it will go.
^ Take out the exhaust filter or the filter
grille if this has been fitted and re-
place with the blower connection
socket.
^ Close the dust compartment lid.
^ Attach the adapter to the hose con-
nector.
^ Now open the accessories compart-
ment and insert the adapter into the
blower outlet.
After use, pull firmly on the adapter to
remove it from the hose connector.
Remove the blower connection socket
and refit the exhaust filter or filter grille.
22