Miele S 560 Operating Instructions Manual page 11

Attaching the floorhead
^ Push the suction tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into posi-
tion.
^ To release the floorhead from the suc-
tion tube, press the locking button
(see arrow) and pull the suction tube
away from the floorhead.
The floorhead can be used for all nor-
mal cleaning of carpets and rugs. It can
also be used with the brush protruding
to vacuum hard flooring which is not
susceptible to scratching. For hard
flooring, such as stone and floors which
are susceptible to scratching, e.g. par-
quet, we recommend using the special
Miele floor brush (see "Optional acces-
sories").
It is also important to observe the
flooring manufacturer's cleaning and
care instructions.
Vacuum carpets and rugs with the
brush retracted:
^ Press the foot switch to the
tion.
Clean hard flooring which is not sus-
ceptible to scratching with the brush
protruding:
^ Press the foot switch to the
tion.
Electrobrush / Turbobrush
Some models may be supplied as stan-
dard with an Electrobrush or a Turbo-
brush in addition to the normal floor-
head (see "Optional accessories").
g
posi-
h
posi-
Please refer to the separate operating
instructions supplied with these
brushes for instructions on use and
maintenance.
Preparing for use
11