Sony XAV-68BT Service Manual page 5

2. The following screen is displayed and the destination setting
mode becomes effective.
(Displayed characters/values in the following fi gure are ex-
ample)
Note: Refer to following "2-2. Entering the Destination Code" for opera-
tion method.
<DESTINATION SETTING MODE>
0 0 0 0 0 1
E U R : 0 0 0 0 0 0
E 1 7 : 0 0 0 0 1 2
R U 2 : 0 0 0 0 0 4
E A : 0 0 0 0 1 A
3. The resetting operation is executed by pressing the [ENTER]
button on the remote commander the setting ends, and the unit
returns to the normal condition.
2-2. Entering the Destination Code
Note 1: Input of the destination code cannot be performed by the keys of
main unit. Be sure to input the destination code by remote com-
mander.
• Method of operation by remote commander
Note 2: The ten key cannot be used.
1. Press the [ V ] or [ v ] button, and select the alphanumeric char-
acter of "0 to F".
2. The digit advances by pressing the [ b ] button.
The digit returns by pressing the [ B ] button.
3. The setting is completed by pressing the [ENTER] button, and
the initialization operation is done.
2-3. Destination Code
Destination
AEP and UK models
US and Canadian models
E (NTSC) model
E (PAL) model
Saudi Arabia model
Indian model
Australian model
Russian model
3. Confi rmation After Destination Setting
Execute the following operation after completing the destination
setting, and confi rm a correct destination was set.
U C : 0 0 0 0 0 1
E : 0 0 0 0 0 3
I N : 0 0 0 0 1 5
E T 4 : 0 0 0 0 1 C
Destination code
000000
000001
000003
000012
00001A
000015
00001C
000004
Destination setting checking method:
1. In the state of source off (Home screen is displayed), enter the
test mode by pressing the buttons on the remote commander in
order of the [4] t [5] t [0] (press only the [0] button for two
seconds).
2. The following screen is displayed and confi rm that item of the
destination has been rewritten correctly.
(Displayed characters/values in the following fi gure are ex-
ample)
<Test Mode>
1.AUDIO FACTORY MODE
2.AUDIO DEBUG MODE
4.VISUAL FACTORY MODE
6.DESTINATION SETTING MODE
DEST: UC REGION: 1
MCU: SONY-ST02-140515
Graphic: SONY-TW02-140514
Mecha: SONY-SP02-140514
Servo: HI6CD1-BBA-893D
BT: H10077-V2R78-20001 / SONY:XAV-68BT
3. The resetting operation is executed by pressing the [ENTER]
button on the remote commander the confi rming ends, and the
unit returns to the normal condition.
4. Processing After the Destination Setting
Be sure to unsolder the SL001 on the MAIN board after doing the
destination setting.
– MAIN Board (Component Side) –
SL001
XAV-68BT
Ver. 1.3
PAN ID: AA2C43FD
SL001
5