Removing The Cabinet - Mitsubishi Electric Mr.Slim MUZ-GC25NA - C1 Service Manual

10-2. MUZ-GC50NA MUZ-GC60NA MUZ-GC71NA
OPERATING PROCEDURE

1. Removing the cabinet

(1) Remove the screws of the service panel.
(2) Remove the screws of the top panel.
(3) Remove the screw of the valve cover.
(4) Remove the service panel.
(5) Remove the top panel.
(6) Remove the valve cover.
(7) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(8) Remove the screws of the cabinet.
(9) Remove the cabinet.
(10) Remove the screws of the back panel.
(11) Remove the back panel.
Photo 3
Screws
of the
back
panel
Set screws of the back panel
Screw of the motor support
NOTE : These photos are MUZ-GC71NA. Other models
are almost the same as MUZ-GC71NA.
Turn OFF power supply. before disassembling.
Photo 1
Screws
of the
cabinet
Photo 2
Screws of
the cabinet
57
PHOTOS
Screw of the top panel
Screws of the cabinet
Screw of the service panel
Screws
of the
top
panel
Set screws
of the back
panel
Screw of
the valve
cover