Control Box - Cabinet Installation - Mitsubishi Electric PAAA18AA1 Installation Manual

The following must be considered while deciding on a location to install the control box:
• Control box must be installed at least 1 inch from the edge of the surface, as shown below.
• The surface must be flat.
• Surface area must not have any cutouts or depressions.

14.1. Control box - cabinet installation

NOTE
Mounting the control box on the cabinet is the preferred mounting method.
Control box can be mounted on the left or right side of the cabinet. However, the control
box positioning dimensions are the same.
© 2022 Mitsubishi Electric US, Inc.
PAA-A18, 24, 30, 36, 42AA1/BA1/CA1
72 Specifications are subject to change without notice.