GoPro Hero 4 User Manual page 6

/ Getting Started
CAMERA SOFTWARE UPDATES
To get the latest features and best performance from your HERO4
camera, make sure you are using the most current camera software.
You can update your camera software via the GoPro App or GoPro
software. For more information, visit gopro.com/getstarted.
CAMERA DEFAULT SETTINGS
The HERO4 Silver camera powers up with the following default settings:
Video 1080p30 SuperView
Photo 12MP, Wide Field of View (FOV)
Multi-Shot Burst option (set to 30 photos in 1 second)
QuikCapture Off
Wireless Off
PRO TIP: To open the settings menu for the current mode, swipe up
on the touch display or press the Settings/Tag button [
10
™
].
POWERING ON + OFF
To Power On:
Press the Power/Mode button [
(red) flash three times and the sound indicator emits three beeps. When
the camera status screen displays information, your camera is on.
To Power Off:
Press and hold the Power/Mode button [
camera status lights (red) flash several times and the sound indicator
emits seven beeps.
PRO TIP: When the camera is off and QuikCapture is enabled, you can
turn the camera on and immediately begin capturing video or Time
Lapse photos just by pressing the Shutter/Select button [
once for video, press and hold for Time Lapse photos. Press again to
stop recording and power off the camera. For details, see QuikCapture
in Setup Mode.
/ Getting Started
] once. The camera status lights
] for two seconds. The
]. Press
11