Video Mode - GoPro Hero 4 User Manual

/ Navigating Settings Menus
TO NAVIGATE WITH THE CAMERA BUTTONS:
1. Verify that the camera is in the desired camera mode. If an icon for
that mode does not appear on the camera status screen, press the
Power/Mode button [ ] repeatedly until it appears.
2. Press the Settings/Tag button [
that mode.
3. Use the Power/Mode button [
4. Press the Shutter/Select button [
within a setting. To select an option, leave the option highlighted
when you move to another screen.
5. To go back to the previous screen or exit the settings menu, press
the Settings/Tag button [
24
] to open the settings menu for
] to cycle through the settings.
] to cycle through the options
].
Video mode contains four capture modes: Video, Time Lapse Video,
Video + Photo and Video Looping.
Capture Mode Description
Video (default) Captures video.
Creates video from frames captured at
specific intervals. Time Lapse Video is
available only in 4K and 2.7K 4:3 resolutions.
Time Lapse Video Time Lapse Video is captured without audio.
Protune
™
not available in this capture mode.
Note: 2.7K 4:3 resolution is available only for Time Lapse video.
Simultaneously captures both video and
photos. You can set the camera to capture a
Video + Photo photo at selected intervals while you record
video. For details, see Video + Photo Intervals
in this section.
Lets you continuously record and save only
the best moments, which helps to conserve
Looping
space on your microSD card. Protune is not
available in this capture mode.

/ Video Mode

, Auto Low Light, and Spot Meter are
25