GoPro Hero 4 User Manual page 14

/ Video Mode
CAPTURING VIDEO
1. Swipe left to display the camera modes, and then tap the upper left
icon (Video mode).
2. If necessary, select a different video capture mode (Video, Time
Lapse Video, Video + Photo, or Video Looping):
a. Swipe up to open the settings menu.
b. Tap Mode, and then tap the desired capture mode.
c. Swipe down to close the settings menu. The icon for the
selected capture mode appears in the upper left on your
camera displays.
3. Press the Shutter/Select button [
and the camera status lights flash while the camera is recording.
4. To stop capturing, press the Shutter/Select button [
camera status lights flash three times and the camera beeps
three times.
If the memory card is full or the battery is out of power, your camera
automatically stops recording. Your video is saved before the camera
powers off.
PRO TIP: When the camera is off and QuikCapture is enabled, you
can turn the camera on and immediately begin capturing video just
by pressing the Shutter/Select button [
recording and power off the camera. For details, see Setup Mode.
26
]. The camera beeps once
]. The
]. Press again to stop
HILIGHT TAGGING
You can mark specific moments in your video during recording or
playback with HiLight Tags. HiLight Tags make it easy to find the best
highlights to share.
You can add tags with your camera, the GoPro App, or the Smart
Remote (sold separately). Tags are visible during playback in the
GoPro App or GoPro software.
To Add a HiLight Tag with Your Camera:
While recording or playing back video, press the Settings/Tag
button [ ].
PRO TIP: In the app, tap the screen during playback to display the
HiLight Tags on the progress bar.
/ Video Mode
27