Answering The Phone - Kyocera Angel SE47 User Manual

82-N8735-1.book Page 69 Thursday, October 27, 2005 12:37 PM
To activate the Voice Wake-up setting:
→
1. Menu Settings
Select
→
Voice Features Voice Wake-Up
With accessory.
→
2. Menu Settings
Select
Disabled
, then press
To wake up the phone:
1. Wake Up
Say " " and listen for a tone.
2. Wake Up
Say " " again until you hear two tones.
If the phone does not recognize your
"Wake up" command, see "Training voice
recognition" on page 70.

Answering the phone

You can set your hands-free car kit to (1) answer
automatically or (2) answer using a
voice command.
Answering automatically
You can set your phone to answer automatically.
Note:
This setting also works with the portable
hands-free car kit.
→
Menu Settings
• Select
→
Auto-Answer After 5 secs
User Guide for the Kyocera Slider Remix KX5 Phone
Answering using voice commands
→
If Auto-Answer is turned off, you can use a voice
→
command to answer an incoming call using the
installed hands-free car kit.
→ →
Keyguard
• Select
.
To activate the Voice Answer setting:
1.
2.
3.
To answer a call:
When you receive an incoming call, the phone
responds: "Incoming call, answer?" or "Incoming
roam call, answer?" If the caller is recognized as a
contact entry in your phone, then the phone will
say "Incoming call from (Name), answer?"
• Say "
→ →
Accessories
.
→ →
Menu Settings Accessories
→
Auto-Answer Disabled
.
→ →
Menu Settings
Select
→
Voice Features Voice Answer
Enabled
Highlight and press
→ →
Menu Settings Silent Mode
Select
Normal Sounds
, then press
Yes
" or press any key except
→
.
.
→
.
.
69