Making A Call Using Digit Dialing - Kyocera Angel SE47 User Manual

82-N8735-1.book Page 68 Thursday, October 27, 2005 12:37 PM
Erasing voice tags
To erase all voice name dial recordings in
your phone:
→ →
1. Menu Settings Voice Features
Erase Voice Dial
.
2. Yes
Select .

Making a call using digit dialing

When using digit dialing, you speak digits to dial a
phone number.
Note:
You cannot speak a string of digits. You
must speak one digit at a time and wait for
the prompt.
1.
From the home screen, press
responds: "Say a name or say Dial."
2. Dial
Say " ". The phone responds:
"Speak a digit."
3.
Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
If you pause, the phone will prompt you with
the following five options. After the prompt,
speak an option.
Clear
– Say " " to erase the last digit entered.
The phone responds: "Digit cleared."
To clear the entire phone number, say
Clear
" " again. When the phone prompts
you with "Clear entire phone number?",
Yes
say " " to clear or "
Call
– Say " " to dial the number.
68
– Say "
– Say "
→
– Speak a digit to enter the next digit. Once
Using voice features with
hands-free car kits
You can use voice commands to make a phone
call or to answer the phone only if your phone is
connected to a professionally installed Kyocera
hands-free car kit (sold separately).
. The phone
Note:
installed hands-free car kits unless noted.
To shop for hands-free car kits, visit
www.kyocera-wireless.com/store
800-349-4188 (U.S.A. only) or 858-882-1410.
Waking up the phone
If your phone is connected to a Kyocera installed
hands-free car kit, you can use the voice
command to activate the phone to make a
phone call.
Note:
Keyguard active.
No
" to cancel.
Verify
" to cause phone to repeat the
set of digits that you input.
Cancel
" to exit voice recognizer and
return to the home screen.
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
The following features apply only to
or call
Voice Wake-up does not work with
Using Voice Recognition