Mains Connection; Audio Connections - Behringer Eurorack MX3242X User Manual

+
Please note that both PSU and EURORACK will heat up during operation. This is completely
normal and does not indicate a malfunction.

6.2 Mains connection

+
Please make sure that all units have a proper ground connection. For your own safety, it is
advisable not to remove the ground connection within the units or at the supply, or fail to make
this connection at all.

6.3 Audio connections

+
Please ensure that only qualified persons install and operate the EURORACK. During
installation and operation the user must have sufficient electrical contact to earth.
Electrostatic charges might affect the operation of the EURORACK!
+
Care should be taken NOT to plug mics into the console (or stagebox) while the Phantom
Power is on. Also, mute the monitor/PA speakers when turning Phantom Power on or off.
Allow the system to adjust for a couple of seconds after engaging Phantom Power before
setting input gains.
Fig. 6.1: Headphones connector