Table of Contents
Advertisement
2.4 Rear panel
The mains connection is on a standard IEC receptacle. An
appropriate power cord is supplied with the unit.
FUSE HOLDER. Before connecting the unit to the mains,
ensure that the voltage setting matches your local voltage.
Blown fuses should only be replaced by fuses of the same
type and rating. Please also read the information given in
chapter 6 “SPECIFICATIONS”.
The three PARALLEL SPEAKER OUTPUTs provide the
mono main signal on a Neutrik Speakon-compatible
connector (pins 1+/1- and 2+/2-) and on two
1/4" TS connectors.
+
W
+
This is the cooling fan of the unit.
SERIAL NUMBER.
3. DIGITAL EFFECTS PROCESSOR
The PMP518M features a built-in digital effects processor. This
effects processor offers a large number of standard effects
such as Hall, Chorus, Flanger, Delay and various combination
effects. Using the FX control, you can feed signals into the
effects processor. The integrated effects module has the
advantage of requiring no wiring. This way, the danger of creating
ground loops or uneven signal levels is eliminated at the outset,
completely simplifying the handling.
Presets 00 - 09:
Presets 10 - 19:
Presets 20 - 29:
Presets 30 - 39:
Presets 40 - 49:
Presets 50 - 59:
Presets 60 - 69:
Presets 70 - 79:
Presets 80 - 89:
Presets 90 - 99:
EUROPOWER PMP518M
Fig. 2.2: Rear panel control elements and connectors
Blown fuses must be replaced by fuses of the same type and
rating.
The mains connection is made using the enclosed power cord
and a standard IEC receptacle. It meets all of the international
safety certification requirements.
+
The inputs and outputs of the BEHRINGER EUROPOWER are
unbalanced 1/4" TS connectors — except for the balanced mono
line inputs and the balanced XLR inputs. Of course, all inputs and
outputs work with both balanced and unbalanced connectors.
The Tape Ins and Outs are on RCA connectors.
+
4. INSTALLATION
4. INSTALLATION
4.1 Mains connection
4.2 Audio connections
Fig. 4.1: 1/4" TS connector
7
Advertisement
Table of Contents
