Selecting The Paper Size - Kyocera copier Operation Manual

Section 3 PREPARATIONS
4
Press down on the stopper extension lock and slide the
paper stopper towards the rear of the drawer to set the lock
into place. The paper stopper is now in position for Folio
and Oficio II size paper.
3-4

Selecting the paper size

Perform the following procedure to use the operation panel and
select the size of paper that is loaded in the drawer.
1
Press down on the Paper Select key for at least 3 seconds.
The first default item for paper size selection will be shown.
2
Press the Number of Copies / Zoom(+) or Number of
Copies / Zoom(-) key until "F12" (Default item: Upper
Drawer Paper Size) is shown.
NOTE
To select the size of paper loaded into the optional Paper
Feeder, make sure that "F13" (Default item: Paper
Feeder Paper Size) is shown.
3
Press the Recall%/Enter key.