Kyocera copier Operation Manual page 76

Section 8 TROUBLESHOOTING
Trouble
Black or white vertical bands
appear on the copies.
The copy image is skewed.
Paper jams occur often.
The Add Toner indicator
doesn't go out even after
replacing the toner container.
8-10
Checkpoint
Is the charger cleaner in its home position
(marked "CLEANER HOME POSITION")?
If you are using the optional Document
Processor, is the slit glass dirty?
Were the originals set correctly?
Is the copy paper loaded properly in the
drawer?
Is the copy paper curled, folded or
wrinkled?
Is there any jammed paper or loose scraps
of paper remaining inside the copier?
Does the registered paper size match the
size you are actually using?
Did you shake the new toner container
enough?
Procedure
Remove the Process Unit and return the
charger cleaner to its home position.
Clean the slit glass.
It is also possible to use the Black Line
Correction function to make black lines on
the copies less apparent.
When setting originals on the platen, align
them flush up against its upper left corner.
When setting originals in the optional
Document Processor, align the original
insert guides securely before setting the
originals.
Load the paper properly.
Replace the copy paper with new paper.
Carry out the appropriate procedure to
remove the paper.
Make sure the registered paper size
matches the size you are actually using.
Shake the toner container a number of
times.
Reference
Page
9-4
6-2
9-1
4-2
7-2
3-1
—
8-3
3-1
—