Switching The Language; Adjusting Lcd Monitor - Panasonic HDC-SD1 Operating Instructions Manual

Setup
To recharge the built-in lithium battery:
If you connect the AC adaptor or insert the
battery in this unit, the built-in lithium battery will
be recharged. Leave the unit as it is for approx.
24 hours and the battery will save the date and
time for approx. 6 months. (The battery is still
being recharged even if the mode dial is set to
OFF.)
(For Australia)
WARNING
THE LITHIUM BATTERY IN THIS UNIT
MUST ONLY BE REPLACED BY QUALIFIED
PERSONNEL. IF THIS IS NECESSARY,
CONTACT THE PANASONIC CUSTOMER
CARE CENTRE ON 132600 FOR YOUR
NEAREST AUTHORIZED SERVICE
CENTRE.

Switching the language

You can switch the language on the screen
display or the menu screen.
1
Press the MENU button, then
select [LANGUAGE] and press
the centre of the cursor button.
2
Select [English] and press the
centre of the cursor button.
36
VQT1A34

Adjusting LCD monitor

Adjusting the brightness and the
colour level of the LCD monitor
1
Press the MENU button, then
select [SETUP]
[YES] and press the cursor
button.
2
Move the cursor button up or
down to select the item to be
adjusted. Then, press the cursor
button and move the cursor
button left or right to make the
adjustment.
The bar display moves.
≥After adjustments are made if no operations
are performed for about 2 seconds, the bar will
disappear.
≥Press the MENU button to exit the menu
screen.
[BRIGHTNESS]: Brightness of the LCD monitor
[COLOUR]: Colour level of the LCD monitor
≥These settings will not affect the images
actually recorded.
# #
[LCD SET]