Finishing Your Workout - Vision Fitness CLASSIC User Manual

classic
console
ZEIT
INCLINE DISTANCE
STEIGUNG ENTFERNUNG
CALORIES PACE
KALORIEN TEMPO
wORKOUT pROFILE: shows the incline level of selected workout.
INCLINE DISTANCE
STEIGUNG ENTFERNUNG
CALORIES PACE
KALORIEN TEMPO
the dot matrix will show the incline profile as
you progress through a program.
6
CLAssIC DIspLAY wINDOws
• TIME: shown as minutes : seconds. View
the time remaining or the time elapsed in your
workout.
• INCLINE: shown as percent. indicates the
incline of your walking or running surface.
• DIsTANCE: shown as kilometers or miles.
indicates distance traveled or distance
remaining during your workout.
SPEED
• spEED: shown as km/h or mph. indicates
GESCHWINDIGKEIT
how fast your walking or running surface is
moving.
HEART RATE
• CALORIEs: total calories burned or calories
HERZFREQUENZ
remaining to burn during your workout.
• pACE: indicates how many minutes it takes
to complete a kilometer or mile while running
or walking at your current speed. For example:
if at your current speed it will take you 10
minutes to complete a kilometer or mile, the
treadmill will display '10.0' as your pace.
SPEED
GESCHWINDIGKEIT
• HEART RATE: shown as BPm (beats per
minute). used to monitor your heart rate
(displayed when contact is made with both
HEART RATE
pulse grips).
HERZFREQUENZ
CLAssIC CONsOLE gETTINg sTARTED
1) check to make sure no objects are placed on the belt that will hinder the movement of the treadmill.
2) Plug in the power cord and turn the treadmill on.
3) stand on the side rails of the treadmill.
4) attach the safety key clip to part of your clothing making sure that it is secure and will not become detached during
operation.
5) insert the safety key into the safety keyhole in the console.
6) You have two options to start your workout:
A) QUICK sTART Up
simply press the staRt key to begin working out.
time, distance, and calories will all count up from zero. oR...
B) sELECT A pROgRAM
1) select useR 1, useR 2 or guest using and press enteR to confirm.
2) set age & Weight using or keypad and press enteR to confirm.
3) select a program using PRogRam KeYs and press enteR to confirm.
4) complete the program setup using and press enteR to confirm.
5) When setup is complete, press staRt to begin your workout.

FINIsHINg YOUR wORKOUT

When your workout is complete, the display will flash "WoRKout comPlete" and beep. Your workout information will stay
displayed on the console for 30 seconds and then reset.
TO CLEAR sELECTION/REsET THE CONsOLE
Hold stoP key for 3 seconds.
classic
console
7