Playing A Tape - Sony MHC-GT660 Operating Instructions Manual

 This system does not necessarily support all
the functions provided in a connected USB
device.
 Files recorded by this system are played back
in the order of folder creation. Files recorded
by a device other than this system such as
a computer may not be played back in the
order in which they were recorded.
 The playback order for the system may differ
from the playback order of the connected
USB device.
 Always turn off the system before removing
the USB device. Removing the USB device
while the system is on may corrupt the data
on the USB device.
 Do not save other types of files or
unnecessary folders on an USB device that
has MP3 files.
 Folders that have no MP3 files are skipped.
 The system can only play MP3 files that have
a file extension of ".MP3".
 If there are files on the USB device that have
the ".MP3" file extension, but that are not
MP3 files, the unit may produce noise or may
malfunction.
 Up to 999 MP3 files or 997 folders can be
contained on a single USB device.
The maximum number of MP3 files and
folders may vary depending on the MP3 file
and folder structure.
 Compatibility with all MP3 encoding/writing
softwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or interrupted
audio or may not play at all.

Playing a tape

1
Select a tape deck.
Press TAPE A/B on the unit
repeatedly.
2
Insert a tape.
Press  PUSH 
insert the TYPE I (normal) tape into
the cassette holder with the side you
want to play facing forward. Make
sure there is no slack in the tape to
avoid damaging the tape or the tape
deck. Press  PUSH
again to close the cassette holder.
3
Start playback.
Press  (or  on the unit)
Do not eject the tape during playback
or recording, as this may cause
irreparable damage to the tape and
cassette holder.
4
Adjust the volume.
Press VOLUME +/ (or turn
MASTER VOLUME on the unit)

on the unit, and

on the unit

.

.

Continued
1
GB