Playing A Tape - Sony R-D-S EON MHC-2900 Operating Instructions Manual

> ll
Chapter 4:
the Tape
Player
Playing a Tape
Recording a CD
Recording a CD: Selecting
Tape Length
Automatically (tape
select edit)
Recording a CD: Specifying
Tape Length
(time edit/just edit)
Recording a CD: Specifying
Track Order (programme
edit)
Recording From the Radio
Recording From Another
Tape (dubbing)
Chapter 4: the Tape Player
ee ee eee
Playing a Tape
You can use TYPE I (normal), TYPE II
(CrO,) and TYPE IV (METAL) tapes.
When you insert the tape, the deck detects
the tape type automatically.
POWER—ON
Note
When you use the remote commander for
the following operations, set the TAPE
DECK A/B selector to A or B to switch the
function of the buttons to either deck A or
deck B.
1 Press & to open the tape compartment.
Insert a recorded tape in deck A or B
with the tape side facing down. Push to
close the compartment.
2 Choose single-side, dual-side, or relay
play.
The DIRECTION mode setting affects
both decks.
Press DIRECTION
To play
so that
One side of the tape <= appears
Both sides* C> appears
Both decks in RELAY appears
succession™*
* The deck stops automatically after
repeating the sequence 5 times.
* See "To play both decks in
succession(relay play)."
3 Press > (to play the front side) or <<]
(to play: the reverse side).
The tape starts playing.
To Press
Stop play a
Pause Il PAUSE on the
deck B
Resume play after IE PAUSE on the
pause deck B or <J or
>
Fast forward PP for front side
44 for reverse side
Rewind 44 for front side
> for reverse side
Remove the cassette &
To find the beginning of a track
(AMS)
Using the AMS (Automatic Music Sensor)
feature, you can quickly find the track
you're looking for. The deck senses where a
music track begins by detecting a blank
space of more than 4 seconds between
tracks.
AMS does not function while the other
deck is being played or paused.
If the side of the To play the
cassette being next track, track being
played is the press played,
press
Front side (>) >> <<
Reverseside(<]) <4 PP.
To play automatically after fast
winding (auto play)
To start playing from the beginning of the
front side, press [> while holding down
AMS <4.
To start playing from the beginning of the
reverse side, press <] while holding down
AMS >.
To play both decks in succession
(relay play)
Relay play always follows the following
sequence. When the reverse side of the tape
in deck B finishes playing, the following
sequence continues 4 more times.
Deck A = Deck A
(Front side) (Reverse side)
t 1
Deck B 2 Deck B
(Reverse side) (Front side)
1 Press & and insert recorded tapes in
both decks.
2 Press DIRECTION so that RELAY
appears in the display.
3 Press <J or [= on either deck.