Start Recording - Sony MHC-GT660 Operating Instructions Manual

2
Prepare the recording source.
For CD Synchro Recording:
Press CD
function. Load the disc you want
to record, and press DISC SKIP
repeatedly to select the disc.
To select the play mode, press PLAY

MODE
player is stopped (see "To change the
play mode" (page 14)).
To record only your favorite CD
tracks or MP3 files in your desired
order, perform steps 2 to 6 of
"Creating your own program" (page
25).
For Manual Recording and Sound
Mixing:
Select the desired source to record
or mix.
To record only sound from a
microphone, press CD
not start playing any other source in
step 4.
3
Set deck B to stand by for
recording.
For CD Synchro Recording:
Press CD-TAPE SYNC
unit.
For Manual Recording and Sound
Mixing:
Press TAPE REC PAUSE/START
on the unit.

GB

to select the CD
repeatedly while the CD

, and do

on the
4

Start recording.

While recording, you cannot listen to
other sources.
For CD Synchro Recording:

Press ENTER
is completed, the CD player and the
tape deck stop automatically.
For Manual Recording:
Press TAPE REC PAUSE/START
on the unit, and then start playing the
desired recording source.
If there is noise while recording from
the tuner, reposition the appropriate
antenna to reduce the noise.
For Sound Mixing:
Press TAPE REC PAUSE/START
on the unit, and then start playing the
desired source and start singing or
speaking into the microphone.
If acoustic feedback (howling)
occurs, reduce the volume, move the
microphone away from the speakers,
or change the direction of the
microphone.
To stop recording
Press 
Notes
 Recording stops if you change to a different
function.
 You cannot eject the disc during CD Synchro

Recording.

. When the recording

.

