Sanyo VHR-790 Instruction Manual page 9

Sorting the TV stations
&an@:
TO change TV1 from programme
position "03' to programme position "01".
Programme position
01 02 03
...........
TV
station
TV3
TV2 : TV1 I
1
2
3
4
1 . . . . . . . . . i
t
Press the PRESET button.
Using the CH (+ or -) button select the
desired TV station (e.g. TV1 ).
f \
TV1
I
Using the numeric buttons (O– 9), enter the
target programme position number (e.g. "01 ").
Press the OK button.
Repeat steps 2 to 4 to change another TV
station programme position number.
5 When finished, press the PRESET button.
Clock setting
Example: Date... 9 December, 1997
1
2
3
Time... 16:15
Press the MENUl_W button.
When
the date and time are not set, the
CLOCK SET screen will be displayed.
Press the numeric 4 button.
Set the date and time using the numeric
buttons (O- 9).
Enter in sequence, 0912971615.
(
CLOCK SET
1
!-09-: i-z:-hi-----; i6-; i -K
... ... ... ... ... .
I
kEE!E_J
If you entered a wrong number, press the
CLEAR button to delete it, then enter the
correct number.
Summer time/standard time adjustment
Press the CH (+ or –) button to advance or
retard the clock by one hour.
4 When finished, press the OK button.
Seconds will start counting from "00 as
the OK button is pressed.
The normal TV broadcast screen will
return.
Additional tuning adjustments
Fine tuning
If the tuning is not optimum, it can be
improved by manual fine tuning.
1 Press the PRESET button.
2 Press the FF or REW button to obtain the
best possible picture and sound.
3 Press the OK button.
4 When finished, press the PRESET button.
Skip function
If only programme position numbers 1 to 30
have been preset, set the skip function for
programme position numbers 31 to 88, so that
only the preset TV stations will appear when
pressing the CH (+ or –) button.
1
2
3
4
Press the PRESET button.
Using the numeric buttons or the CH (+ or
-) button, select the programme position
number to skip.
Press the CLEAR button. The "S" indicator
will light.
To cancel the skip function, press the
CLEAR button again to erase the "S
indicator.
Press the OK button.
Repeat steps 2 to 4 for every programme
position number to skip.
5 When finished, press the PRESET button.
Manual tuning
This tuning mode can be used to modify the
settings entered by the Auto tuning function,
or to manually preset the TV stations to
particular programme position numbers.
1 Press the PRESET button.
2
Using the CH (+ or -) button, select the
desired programme position number.
3 Press the PLAY button.
If the search stops on a broadcast other
than the one desired, press the PLAY
button again until the broadcast from the
desired TV station appears on the TV
screen.
4 Press the OK button when the desired TV
station appears on the TV screen.
Repeat steps 2 to 4 to preset another TV
station to another programme position number.
5
When finished, press the PRESET button.
2
PREPARATION
bf
%
PRESET
o-9 0:0
CLEAR
OK
CH (+, -)
MENU/TV
PLAY
REW
FF
iew Zealandonly)
uning or presetting the VCR
hannels
his is very important for correct
-Code operation.
Ieally for simpler operation,
Iannels should be preset as
Wows
=
jr additional channels in your area
is over to you to select the most
Igical channel position to place
Iem.
Sky Television I
4
CanterburgTV.~ 5
Action TV 6
When you use
the G-Code
function to programme a
recording from a certain
channel for the first time, it will
ask you the programme
position number that channel
was preset to. That setting
will
be memorizedand
automaticallysetthe nexttime
the samechannelis selected.