Sanyo VHR-790 Instruction Manual page 3

VCR TUNING (Auto tuning)
J
1
6
(91
2
OK
o
Turn on the VCR using the (!)/1 button.
The AUTO SETUP screen is displayed.
m
If not, press both CHANNEL (+ and –) buttons on the VCR
for 3
~
seconds or more.
Press the OK button.
Auto tuning will start.
The TV stations available in your area will be automatically
preset in order starting from programme position number "01".
\
SORTING THE TV STATION
Example:
To change TVl from programme position "03 to programme position "01"
/
1
PRESET
Press the PRESET button.
2
0 +
CH
Using the CH (+ or –) button select the desired TV
m
station. (e.g. "TV1")
~lm
3 w%
Using the numeric buttons (O – 9), enter the target
a&
programme position number. (e.g. "01")
m
4
OK
o
Press the OK button.
Repeat steps 2 to 4 change another TV station
programme position number.
5
PRESET
o
When finished, press the PRESET button.
CLOCK SETTING
Example:
To set December 9,1997, 16:15.
1 !+fy"
Press the MENWTV button.
Set the date and time using the numeric buttons.
2 gg%
Enter in sequence, 0912971615.
D
CLOCK SET
09.12 97 16.15
a&)
If you entered a wrong number, press the CLEAR button to ~:~~~~:!~:
~:CT
[W 1.ENTER
delete it, then enter the correct number.
3
OK
o
Press the OK button.
This completes the setup.
F}ower interruption
If the power to the VCR has failed or has been disconnected for more
than 1 hour the VCR display will show "-: ––". The clock will need to
be reset. However the tuning information will
not
be erased.
I