Sanyo VHR-790 Instruction Manual page 10

2
PREPARATION
VCR PRESETTING
o-9
?
000
0
0
MENU/TV _
L
—AUDIO
Power interruption
If the power to the VCR has failed
or has been disconnected for
morethanl hour, the VCR
display shows "-: --".
However, the tuner preset
memory will not be erased. So
there is no need to retune the
VCR stations,
The date, time and recording
information regarding future
recordings should be reset.
First refer to"- Clock
setting" on page 8, to set the
clock (date and time), then, the
timer recording programmed
should be set again as desired.
VCR SETUP menu
(for Australia)
O AUTO TUNING MEMORY
1. NTSC PBOPAL-TV NTSC443
2. CH I LD LOCK ON tOFF
[0-91 +SELECT
[ MENU 1 TV
(for NewZealand)
0. AUTO TUNING MEMORY
1. NICAM OAUTO OFF
2. NTSC PBOPAL-TV NTSC443
3, CHI LD LOCK
ON OOFF
[0-91 .SELECT
[ MENU 1 TV
9
Function setup
1
2
. . . . .
Press the MENLVTV button, then press
the numeric 3 button.
MENU
1. T I MER PROGRAM SET
2. PROGRAM CHECK/ CLEAR
[3;:VCR::SETU:P:::::::::::::::::;
4. CLOCK SET
I
Press the numeric button corresponding
to the item to set, until the "O" symbol is
displayed to the left of the desired mode.
(The settings indicated by the "O" symbols
are the factory default settings.)
; 0. AUTO TUNING MEMORY
................................................................................................
Auto tuning
The Auto tuning function will start, and all
programme positions will be automatically
reprogrammed.
Note:
Be careful not to press the numeric button O if you
do not wish to reprogrammed all programme
positions.
.......... -------- ---------- ---------- ---------- ......?
~ (New Zealand only)
~ 1. NICAM OAUTO OFF I
NICAM broadcasts setting
AUTO: To record NICAM stereo broadcasts
and bilingual broadcasts.
OFF: To record the normal sound (FM mono).
..........---------- ---------- ..----------- ------
...........
! 2
.NTSC PBOPAL-TV NTSC443 !
................................................................................................1
NTSC playback system
PAL-TV:
When using a PAL (B/G) system
TV.
NTSC443: When using an NTSC4.43 system
TV. (Please use the
AUDIO/VIDEO OUT terminals.)
................---------------------- -------------------------------------- ................-----
~ 3. CHILD LOCK ON 00FF ~
................................................................................................1
Child lock function
ON: "BLOCKED
is
displayed on the TV
screen and the sound is muted.
OFF: The child lock function is not engaged.
3
When finished, press the MENU~V
button.
Hi-Fi Stereo/Bilingual programmed
sound selection
Using the AUDIO button, select the desired
sound to listen
Stereo sound selection
When a stereo broadcast is received, the
stereo indicator "ST illuminates on the VCR
display.
VCR display
Selected sound
—
"~R,,
Left and Right tracks
"~
7, Left track
"
R" Right track
No indicator
Monaural
Bilingual sound selection
When a bilingual broadcast is received, the
bilingual indicator "BIL illuminates on the
VCR display.
VCR display Selected sound
"LR" Main and Sub
"~ ,,
Main
" ~,,
Sub
No indicator
Main