Web Configuration
Checking camera feeds using Live Video function
The Live Video page provides a simple way to test the video inputs form any connected analog
camera. This Live Video page is not intended as the primary way of viewing the video on the IP
Encoder, this should be performed using the Intellex IP.
The Live Video pages are accessible to any authorized user.
Note
To be able to view the Live Video page JavaScript must be installed and enabled on the computer
running the browser session.
Procedure 3-2 Checking camera feeds using the Live Video function
1 Login to the IP Encoder using an appropriate username and password, for more details refer to
Login to the IP Encoder on page 3-2.
2 Select Live Video from the IP Encoder Front Page.
The Live Video page is displayed, as shown in Figure 3-5.
3-6
Figure 3-5 Live Video page
Installation and User Guide