Trouble Shooting - KAL-FIRE Fairo 60 User Manual

N
F6 or
No
communication
between
receiver and
transmitter.
Check if the ignition cable is not running over the
receiver. Is the ignition cable free?
Y
Try to reconnect the
receiver and
transmitter.
F2: technical box
has become too
warm.
Fairo is given a start
command, but fails to start
or does not jump to error.
Fairo goes on and off
randomly.
Is there
Y
electricity?
Try to start the Fairo manually by pressing the
button next to the flashing lamp. Does this work?
Do you get the same
error message when the
the remote control is placed
near the receiver?
Y
1. Press Menu-key for 10 sec.
2. Select option BND in the special menu by
pressing the Menu-key briefly several times.
3. Remove power from the appliance for 5
seconds, then apply power again.
4. Make connection by pressing both arrow keys
simultaneously.
5. Re-start the appliance.
6. Has the error message disappeared?
Check if the convection is working correctly.
Supply and exhaust of convection air must end up
Check if the Fairo
is not
set to timer or
thermostat mode.
Is receiver
Y
reachable?
N
N
N
in the same pressure area-.
Automatic burner
Receiver faulty.
N
Contact your dealer.
52

8. Trouble shooting

Is the red light
flashing on the
receiver?
Y
N
Receiver
faulty.
The signal is probably
blocked.
Ensure this is free.
Faulty.
N