Operation Ex-Factory - KAL-FIRE Fairo 60 User Manual

6.3

Operation ex-factory

The Fairo is set ex-factory without Timer and Thermostat function.
The installer is the only person who can activate these functions in
the installer menu.
When the Fairo is ignited, the flame height can be adjusted at any time
via the standard menu.
Igniting the Fairo
Activate the display by pressing one of the
four keys. Ignite the Fairo by pressing
simultaneously and wait until the "hourglass"
has disappeared.
Setting the flame height
Press to decrease the flame height
(minimum=1) or
height (maximum= 15).
Setting the current time
Press twice. The current time starts flashing. Use
set the correct time. Press
Switching off the Fairo
If you are not in the basic menu, press
menu. Switch off the Fairo by pressing
Reset after a malfunction
If the system does not detect any flames
after 30 seconds of sparks or the display
shown appears, then there is a malfunction.
Reset the system by pressing
simultaneously. This can be attempted 3x,
afterward the Fairo will enter malfunction
mode for 24 hours. For code explanation,
see chapter 8.
to increase the flame
to return to the basic menu.
and
36
6. O peration
1203
and
xx
30.5 C
1203
and
to access the basic
.
xx F 13
Reset
12
to