Table of Contents
Advertisement
Programme
Degree of soil
1)
Type of load
All
Crockery, cutlery,
3)
pots and pans
Heavy soil
Crockery, cutlery,
pots and pans
Fresh soil
4)
Crockery and cut-
lery
5)
All
1) The pressure and the temperature of the water , the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and
cutlery with normal soil. (This is the standard programme for test institutes).
3) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts
the temperature and quantity of the water, the energy consumption and the programme duration.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
5) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes
and bad odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
Options
Multitab
Activate or deactivate the Multitab option
before the start of a programme. You
cannot activate or deactivate this option while
a programme operates.
This option deactivates the flow of rinse aid
and salt. The related indicators stay off.
1. Press Multitab, the Multitab indicator
comes on.
• The option will stay on until you deacti-
vate it.
If you stop to use the combi detergent
tablets, before you start to use
www.zanussi.com
Programme
phases
Prewash
Wash from 45 °C to 70
°C
Rinses
Dry
Prewash
Wash 70 °C
Rinses
Dry
Wash 60 °C
Rinse
Prewash
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Set the water softener to the highest level.
2. Make sure that the salt container and the
rinse aid dispenser are full.
3. Start the shortest programme with a rins-
ing phase, without detergent and without
dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse aid.
Duration
Energy
(min)
40 - 150
0.6 - 1.4
130 - 150
1.3 - 1.4
30
0.8
14
0.1
This option is not applicable to
Water
(kWh)
(l)
8 - 14
13 - 15
9
4
.
5
Hide quick links:
Advertisement
Table of Contents
