Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDF14003WA
Summary of Contents for Zanussi ZDF14003WA
- Page 1 User manual Dishwasher ZDF14003WA...
-
Page 2: Table Of Contents
Old hose sets must not be reused. • Before you connect the appliance to new Warning! Risk of fire and electrical pipes or pipes not used for a long time, let shock. the water flow until it is clean. • The appliance must be earthed. www.zanussi.com... - Page 3 Serial Number : gent packaging. • Do not drink and play with the water in the appliance. • Do not remove the dishes from the appli- ance until the programme is completed. There can be detergent on the dishes. www.zanussi.com...
-
Page 4: Control Panel
Salt indicator. This indicator is off while the programme operates. Multitab indicator. Programmes Programme Degree of soil Programme Duration Energy Water Type of load phases (min) (kWh) Normal soil Prewash 1.03 Crockery and cut- Wash 50 °C lery Rinses www.zanussi.com... -
Page 5: Options
• The option will stay on until you deacti- 5. Adjust the released quantity of rinse aid. vate it. If you stop to use the combi detergent This option is not applicable to tablets, before you start to use www.zanussi.com... -
Page 6: Before First Use
Delay until the indicators from the salt container when you fill it. , and start to flash. Risk of corrosion. To prevent it, after you fill 4. Press Multitab. the salt container, start a programme. • The indicators go off. www.zanussi.com... -
Page 7: Daily Use
• If the salt indicator is on, fill the salt con- tainer. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. www.zanussi.com... - Page 8 3. Close the appliance door. The display shows 0:00 and the phase indica- 4. Turn the knob until the programme marker tors go off. is aligned with the programme you want to set. 1. Press the on/off button to deactivate the appliance. www.zanussi.com...
-
Page 9: Hints And Tips
Before starting a programme Do not use more than the correct quantity Make sure that: of detergent. Refer to the instructions on • The filters are clean and correctly installed. the detergent packaging. • The spray arms are not clogged. www.zanussi.com... -
Page 10: Care And Cleaning
If the holes in the spray arms are clogged, re- move remaining parts of soil with a thin poin- ted object. External cleaning Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abra- sive products, abrasive cleaning pads or sol- vents. www.zanussi.com... -
Page 11: Troubleshooting
• The released quantity of rinse aid is too If the display shows other alarm codes, con- much. Adjust the rinse aid selector to a low- tact the Service. er position. • The quantity of detergent is too much. www.zanussi.com... -
Page 12: Technical Information
1) Connect the water inlet hose to a water tap with a 3/4'' thread. 2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. www.zanussi.com... -
Page 13: Environment Concerns
Help protect the environment and human municipal office. health and to recycle waste of electrical and • Discard correctly the packaging material. electronic appliances. Do not dispose Recycle the materials with the symbol www.zanussi.com... - Page 14 www.zanussi.com...
- Page 15 www.zanussi.com...
- Page 16 www.zanussi.com/shop...