Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDF 4013
Summary of Contents for Zanussi ZDF 4013
- Page 1 User manual Dishwasher ZDF 4013...
-
Page 2: Table Of Contents
Do not use old hoses again. – Bed and breakfast type environments. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is Warning! Risk of injury. clean. www.zanussi.com... -
Page 3: Product Description
• Do not use water spray and steam to clean the appli- Serial Number : ance. Product description Worktop Lower spray arm Filters Rating plate Rinse aid dispenser Detergent dispenser Salt container Water hardness dial Upper spray arm Upper basket www.zanussi.com... -
Page 4: Control Panel
On/off button Indicators Programme buttons Display Delay button Function buttons Indicators Description Wash indicator. End indicator. Multitab indicator. Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme operates. www.zanussi.com... -
Page 5: Programmes
You cannot activate or de- This function deactivates the flow of rinse aid and salt. activate this function while a programme operates. The related indicators are off. 1. Press the on/off button to activate the appliance. The programme duration can increase. www.zanussi.com... -
Page 6: Before First Use
28 - 35 19 - 22 33 - 39 3.3 - 3.9 23 - 27 15 - 18 26 - 32 2.6 - 3.2 18 - 22 11 - 14 19 - 25 1.9 - 2.5 13 - 17 www.zanussi.com... - Page 7 Example: = level 5. 5. Press function button (A) again and again to change the setting. 6. Deactivate the appliance to confirm. Filling the salt container Caution! Only use dishwasher salt. Other products can cause damage to the appliance. www.zanussi.com...
-
Page 8: Daily Use
Refer to the supplied leaflet with examples of the items do not move. load of the baskets. • Make sure that the spray arms can move freely before • Only use the appliance to wash items that are dish- you start a programme. washer-safe. www.zanussi.com... - Page 9 – The delay indicator goes off. dishes. – The wash indicator comes on. We recommend that you use detergent tablets with long – The display shows the programme duration. programmes. www.zanussi.com...
-
Page 10: Care And Cleaning
Make a check regularly and, if necessary, clean them. Cleaning the filters To remove filters (B) and Remove filter (A). Wash (C), turn the handle coun- the filter with water. terclockwise and remove. Pull apart filter (B) and (C). Wash the filters with water. www.zanussi.com... -
Page 11: Troubleshooting
The water inlet hose has a kink or a Make sure that the position of the hose is bend. correct. The anti-flood device is on. There are Close the water tap and contact the Serv- water leakages in the appliance. ice. www.zanussi.com... - Page 12 The cap of the salt container is loose. Tighten the cap. Whitish streaks and stains or The released quantity of rinse aid is too Decrease the released quantity of rinse aid bluish layers on glasses and much. dishes. www.zanussi.com...
-
Page 13: Technical Information
Refer to the rating plate. Voltage 220-240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) max. 60 °C Water supply Cold water or hot water www.zanussi.com... -
Page 14: Environment Concerns
With a correct level the appliance door closes and seals correctly. Install the appliance worktop to the appliance if you want to use the dishwasher as a freestanding appliance. The plinth on freestanding appliance is not adjustable. www.zanussi.com... - Page 15 www.zanussi.com...
- Page 16 www.zanussi.com/shop...