Panasonic DMR-EH50 Operating Instructions Manual page 47

∫ To stop transferring (dubbing)
Press and hold [RETURN] for 3 seconds.
≥If stopped partway, transferring (dubbing) will be up to that
point. However, in high speed mode, only titles that have
completed transferring (dubbing) at the point stopped are
transferred (dubbed). [Even if the title was not transferred
(dubbed) to the DVD-R, DVD-RW (DVD-Video format) or +R,
the amount of remaining writable disc space becomes less.]
∫ To return to the previous screen
Press [RETURN].
∫ Recording and playing while transferring
(dubbing)
You can record and play using the HDD while high speed
transferring (dubbing).
Press [ENTER] to cancel the screen display.
≥To confirm the current progress
Press [STATUS].
[Note]
≥You cannot perform chasing play or edit etc. while transferring
(dubbing).
≥Timer recordings executed while transferring (dubbing) are
recorded to the HDD regardless of the recording drive settings.
≥You cannot play a playlist while transferring (dubbing) titles with
"One time only recording" restriction (
To play DVD-R, DVD-RW (DVD-Video format) and +R on other
players, it is necessary to finalize them after transfer (dubbing).
Transferring (dubbing) list icons and functions
Transferring (dubbing) list indicators
Titles and playlists that can be transferred
(dubbed) in high speed mode to DVD-R, etc.
( 26)
Title with "One time only recording" restriction
Titles erased from the HDD by "One time only
recording" restriction after transferring (dubbing).
Title or playlist contains still picture(s)
≥Still picture(s) cannot be transferred (dubbed).
Title or playlist recorded using a different encoding
(NTSC)
system from that of the TV system currently
(PAL)
selected on the unit.
≥Titles and playlists displaying these marks
cannot be selected.
Data size of each registered item
Size:
Destination Capacity: 4343MB
Size: 0MB
(0%)
No. Size Name of item
Data size recorded to the transfer
New item (Total=0)
(dubbing) destination
≥When transferring (dubbing) at normal
speed, the total data size will change
Page 01/01
Create dubbing list.
according to the recording mode.
≥The total data size shown may be
larger than the sum of the data sizes
for each registered item, because of
data management information being
written to the transfer (dubbing)
destination, etc.
To show other pages
Press [3, 4, 2, 1] to select "Previous" or "Next" and press
[ENTER].
≥You can also press [:, 9] to show other pages.
Multiple editing
Select with [3, 4, 2, 1] and press [;]. (Repeat.)
Press [ENTER] to register to the list.
≥A check mark appears. Press [;] again to cancel.
≥When you switch between the "VIDEO" and "PLAYLISTS" tab,
the check mark is cancelled.
45).
∫ To edit the transferring (dubbing) list
Select the item in step 5–4 ( 46, right column)
1 Press [SUB MENU].
2 Press [3, 4] to select the operation and press
[ENTER].
Erase All:
Erase all items registered on the transferring (dubbing) list.
Press [2, 1] to select "Yes" and press [ENTER].
Add:
Add new items to the transferring (dubbing) list.
Press [3, 4, 2, 1] to select the playlists and titles to be added and
press [ENTER].
Erase:
Erase the selected items.
Press [2, 1] to select "Yes" and press [ENTER].
You can also erase multiple items (
Move:
Move selected items or change the order of items on the transferring
(dubbing) list.
Press [3, 4] to select the destination and press [ENTER].
To cancel all registered transferring (dubbing) setting and lists
After performing steps 1–2 ( 46, left column)
1 Press [3, 4] to select "Cancel All" and press [ENTER].
2 Press [2, 1] to select "Yes" and press [ENTER].
≥The settings and lists may be cancelled in the following situations.
–When a title, still picture, etc. has been recorded or erased at the
transfer (dubbing) source
–When steps have been taken, for instance, to turn off the unit,
open the tray, change the transfer (dubbing) direction, etc.
Erase All
Add
Erase
Move
left, Multiple editing).
RQT8033
47