Panasonic DMR-EH50 Operating Instructions Manual page 16

1
STEP Connection
Connecting a television with AUDIO/VIDEO terminals and VCR
Connecting to the television using the 21-pin Scart leads (
To the aerial
Splitter
Aerial
lead
1
RF OUT RF OUT
This unit's rear panel
Use a splitter if
you also want to
connect the aerial
to your VCR.
VHF/UHF
RF IN
Connecting a television with S VIDEO or COMPONENT VIDEO terminals
AUDIO IN VIDEO IN
R L
Red White Yellow
Audio/
Video
RF OUT RF IN
cable
S VIDEO OUT terminal
Connect to S VIDEO IN terminal on the television
through a S Video cable.
The S VIDEO OUT terminal achieves a more vivid
picture than the VIDEO OUT terminal. (Actual results
depend on the television.)
∫ Component video output
Component signal outputs the colour difference signals (P
reproducing colours. If the television is compatible with progressive output, a high quality picture can be output because this unit's component
RQT8033
video output terminal outputs a progressive output signal (
16
indicates included accessories.
indicates accessories not included.
are required connections. Connect in the numbered order.
1 4
VHF/UHF
RF IN
RF coaxial lead
2
Audio/Video cable
VIDEO VIDEO
Yellow
RF IN RF IN
L
AV1 ( TV )
White
AUDIO AUDIO
Red
R
AV2 ( EXT )
AV4 IN AV4 IN
Audio/Video cable
Red White Yellow
You can also connect with the AV2 terminal
on this unit using the 21-pin Scart lead.
R L
AUDIO OUT VIDEO OUT
Television's rear panel
COMPONENT
S VIDEO IN
VIDEO IN
S Video
cable
S VIDEO OUT S VIDEO OUT
VIDEO VIDEO
Yellow
L
L
White
Y P
B
AUDIO AUDIO
OPTICAL OPTICAL
Red
S VIDEO S VIDEO
COMPONENT COMPONENT
R R
AV4 IN AV4 IN
VIDEO OUT VIDEO OUT
DIGITAL AUDIO OUT DIGITAL AUDIO OUT
(PROGRESSIVE/ (PROGRESSIVE/
AV4 IN AV4 IN OUT OUT
INTERLACE) INTERLACE) (PCM/BITSTREAM) (PCM/BITSTREAM)
15)
BE SURE TO READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 2 BEFORE CONNECTION.
Television's rear panel
AUDIO IN VIDEO IN
R L
Red White Yellow
3
S VIDEO OUT S VIDEO OUT
Yellow
L
White
Y P
B P R
Red
OPTICAL OPTICAL
S VIDEO S VIDEO
COMPONENT COMPONENT
R
AV4 IN AV4 IN
VIDEO OUT VIDEO OUT
DIGITAL AUDIO OUT DIGITAL AUDIO OUT
(PROGRESSIVE/ (PROGRESSIVE/
OUT OUT
INTERLACE) INTERLACE) (PCM/BITSTREAM) (PCM/BITSTREAM)
AUDIO IN
R L
Red White Yellow
Audio/Video
cable
RF OUT RF IN
P R
COMPONENT VIDEO OUT terminal
Connect to COMPONENT VIDEO IN terminal on the television through video
cables. These terminals can be used for either interlace or progressive output
( 69) and provide a purer picture than the S VIDEO OUT terminal.
≥Connect to terminals of the same colour.
≥Video output from the component terminal will have no colour during
EXT LINK recordings. Use a fully wired 21-pin Scart lead between
the TV and the unit when viewing external equipment picture through
the AV2 terminal.
≥Change the "AV1 Output" setting in the SETUP menu (
"Video (with component)" or "S Video (with component)" after tuning
is completed (
Note to owners of progressive compatible PAL system televisions (
/P ) and luminance signal (Y) separately in order to achieve high fidelity in
B R
69).
To household mains socket
(AC 220–240 V, 50 Hz)
AC mains lead
Connect only after all other
connections are complete.
Cooling fan
VCR's rear panel
Television's rear panel
COMPONENT
VIDEO IN
S VIDEO IN
VIDEO IN
Video cable
VIDEO VIDEO S VIDEO OUT S VIDEO OUT
Yellow
L
L
White
Y P
AUDIO AUDIO
Red OPTICAL OPTICAL
S VIDEO S VIDEO
COMPONENT COMPONENT
R R
AV4 IN AV4 IN
VIDEO VIDEO OUT OUT
DIGITAL AUDIO OUT DIGITAL AUDIO OUT
(PROGRESSIVE/ (PROGRESSIVE/
AV4 IN AV4 IN OUT OUT
INTERLACE) INTERLACE) (PCM/BITSTREAM) (PCM/BITSTREAM)
19, 20). If not, the picture will not be in colour.
For progressive output (
4
AC IN
P
B R
59) to
22)
6)