Sony XAV-712HD Operating Instructions Manual page 46

The application will quit because an error
occurred.
 An internal error has occurred.
 Change to another source, then select [USB
Music].
The playback list is empty.
 The playlist contains unplayable files.
 Check if any contents in the USB application are
playable.
The sound in DTS format is not audible.
 Discs in DTS format are not supported. Sound is
not output if the DTS format is selected.
 DTS formatted discs are not playable on this
unit. Use a compatible disc format (page 33).
USB device not supported
 For details on the compatibility of your USB
device, visit the support site on the back cover.
USB hub not supported
 USB hubs are not supported on this unit.
 The character cannot be displayed with the unit.
For MirrorLink™ operation
No audio, confirm smartphone compatibility.
 The sound adjustment of the smartphone is
incorrect.
 Check the smartphone's sound adjustment.
 The smartphone is not compatible with
MirrorLink™.
 Check the smartphone's compatibility with
MirrorLink™ at the support site on the back
cover.
Reestablish connection with MirrorLink
compatible device.
 The smartphone is not connected with this unit.
 Check the connection between this unit and
the smartphone.
 The smartphone is turned off.
 Check the power supply of the smartphone.
 The smartphone is not compatible with
MirrorLink™.
 Check the smartphone's compatibility with
MirrorLink™ at the support site on the back
cover.
Screen content blocked while vehicle in motion.
 MirrorLink™ is being operated while driving.
 Some MirrorLink™ functions are restricted
while driving.
46
GB
For HDMI/MHL connection (XAV-712HD
only):
Connect HDMI or MHL device to the unit.
 No device is connected.
 Connect a device to the HDMI/MHL connection
cable securely.
No Signal
 No signal is being output from the connected
device.
 Make sure the device is connected to the
HDMI/MHL connection cable securely.
 Check the connected device's output signal.
Not Supported Format
 The unit receives unsupported input signal.
 There may be a malfunction of connection cable.
 Replace the cable.
Overcurrent Caution on MHL.
 The connected device is overloaded.
 Disconnect the device, then change the source
by pressing the SOURCE button.
 Indicates that the device is out of order, or an
unsupported device is connected.
For HD Radio operation (XAV-712HD
only):
Linking
 The reception of supplemental program has
become poor.
 Move to an area with better reception.
 Select another station with better reception.
For iTunes Tagging operation:
Internal memory full. Connect iPod to transfer
tags.
 iTunes tags cannot be registered due to
insufficient memory.
 After connecting an iPod, transfer the iTunes
tags to the iPod to free up the memory of the
unit.
iTunes tag already stored.
 An iTunes tag already registered is being
attempted to be registered again.
iTunes tag delete failed.
 An iTunes tag cannot be deleted due to a
problem.
 Try to delete it again.
iTunes tag failed.
 An iTunes tag cannot be registered due to a
problem.
 Try to register it again.