Vpn Passthough - Sapido BRC76n User Manual

Item
Enable Static Route
IP Address
Subnet Mask
Gateway
Metric
Interface

5.6.11 VPN Passthough

Virtual Private Networking (VPN) is typically used for work-related networking. For VPN tunnels,
the router supports IPSec, Pass-through, PPTP Pass-through, and L2TP Pass-through.
Item
IPSec Pass-through
PPTP Pass-through
4. Disable：do not receive any RIP packet
5. Only receive RIP1 packet
6. Only receive RIP2 packet
Description
Enable or Disable dynamic route
Destination IP address
Destination IP subnet mask
Gateway IP address for destination
Metric number on router's routing table
Static route rule for LAN or WAN interface
Description
Internet Protocol Security (IPSec) is a suite of protocols used to
implement secure exchange of packets at the IP layer. To allow
IPSec tunnels to pass through the router, IPSec Pass-through is
enabled by default. To disable IPSec Pass-through , select Disable
Point-to-Point Tunneling Protocol is the method used to enable
VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP
tunnels to pass through the router, PPTP Pass-through is enabled
by default. To disable PPTP Pass-through, select Disable.