Figure 8-23. Inserting The Main Board Into The Chassis - Motorola ASTRO XTL 5000 Basic Service Manual
700–800 mhz
digital mobile radio
Hide thumbs
Also See for ASTRO XTL 5000:
- Detailed service manual (528 pages) ,
- Basic service manual (199 pages) ,
- User manual (162 pages)
Table of Contents
Advertisement
Disassembly/Reassembly Procedures: Replacement Procedures
3. Tilt the main board and slide it into place, taking care to line up the RF and DC connectors
with the holes in the back of the chassis. Push back and down on the front of the main board
to fully seat it.
Ensure that the main board alignment holes are positioned over the chassis alignment
bosses and that the main board is fully seated.
!
C a u t i o n
6881096C73-O
Figure 8-23. Inserting the Main Board into the Chassis
Do not leave the main board in the chassis for extended
periods of time without the RF/DC retention clips, or damage
to the board connectors may occur.
8-21
June 11, 2003
Advertisement
Table of Contents
Troubleshooting
