Configuring Your Router - NetComm NTC-6000 Series Quick Start Manual

Overview of Cellular Router Interfaces
Field
Main Antenna Socket
Receive Diversity
Antenna Socket
Serial RS-232 Port
5 Indicator LEDs
2-Way Captive Power
Terminal Block
Reset Button
Ethernet Port
SIM Card Reader

Configuring Your Router

You will need the following hardware components to set up the router:
Power Supply (8-28VDC)
Ethernet cable
Laptop or PC
Active SIM card
The router is primarily managed via web interface. It may also be
configured via the units serial (V.24) port using "AT" (V.250) commands,
this method of operation is further detailed in the user guide.
Before you power up the Cellular Router, please insert an active
SIM card.
6
Description
SMA Female
SMA Female
For connecting to a terminal using a DE-9 cable.
Indicate visually the activities and connection state for power,
service type, data traffic, data carrier connection and network
signal strength.
Power terminal block and the wide voltage range of 8-28V DC
simplify the installation in different industrial environments
Resetting the router to factory default values
For direct connection to your device or number of devices
through a hub or network router.
For insertion and removal of SIM Card