Overview Of Leds - NetComm NTC-6000 Series Quick Start Manual

Overview of LEDs

LED Display
Power (red) Solid ON
Tx/Rx Solid ON
(amber)
DCD (green) Solid ON
Service The green LED will illuminate when cellular network coverage is detected.
Type (green)
Solid ON
Blinking
Off
RSSI (green) This green LED indicates the Received Signal Strength.
There are three possible states that the RSSI LED can operate in, based
upon signal level.
Solid ON
Flashing
Off
NTC-6000 Series - M2M WiFi Router
Description
The red Power LED indicates correct power is applied to
the DC power input jack.
The amber LED will light upon data being sent to or
received from the cellular network.
The green Carrier Detect LED illuminates to indicate a
Data connection.
3G: indicates UMTS/HSPA available coverage
EDGE: indicates EDGE available coverage
2G: indicates GSM/GPRS available coverage only.
HIGH - Indicates the RSSI level is -77dBm (high), or greater
MEDIUM - Indicates the RSSI level is between -91dBm and
-78dBm, (medium)
LOW - Indicates the RSSI level is less than -92dBm (low)
3