[A] Preset Adjustment Of The Picture Level Control Knobs - Control Preset Adj Menu; Overview; Structure Of The Control Preset Adj Menu; Setting Lists In The Control Preset Adj Menu - Sony Trinitron BVM-F24E Operation Manual

A
Preset Adjustment of the Picture Level Control
Knobs — CONTROL PRESET ADJ Menu

Overview

The preliminary adjustments of brightness and contrast
are carried out with the CONTROL PRESET ADJ
menu, to set the preset values to the knobs for the
above-mentioned adjustments.
Preset values can be set either commonly to all
channels or separately for individual channels.
Preset values can be set in the following ways:
• Adjustment with the MANUAL knobs (MANUAL
menu)

Structure of the CONTROL PRESET ADJ Menu

Level 1 Level 2
SELECTED CH DATA
PRESET A1
MANUAL A11
CH SET
MATRIX A2
ITU 709 AUTO A12
VARIABLE
COPY FROM A13

Setting Lists in the CONTROL PRESET ADJ Menu

This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a menu number. These numbers are not
displayed on the screen.
For more information about the menu number, see "About
menu numbers" on page 16.
• The arrow mark (k) refers you to another setting list
that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, the menu does not have
any sub-list.
• Automatic adjustment (AUTO menu)
An external color bar signal is necessary.
• Copying data (COPY FROM menu)
Copying data from other channels, common data, or
other monitors that have been connected via the
serial remote connector, or from data stored in
monitor memory cards
Note
Data copy is impossible between monitors other than
BVM-F24 series.
Level 3 Level 4
BRIGHT
CONTRAST
FULL FIELD WHITE 100%
8 COLOR BAR 100%
8 COLOR BAR 75%
7 COLOR BAR 100%
HDW COLOR BAR
OTHER VALUE A131
OTHER MONITOR A132
MEMORY CARD A133
[A] CONTROL PRESET ADJ menu
Select either PRESET or CH SET. k[A1]
SELECTED CH DATA: The preset adjustment
selected in the INPUT CONFIGURATION menu is
displayed.
PRESET... : Set common values.
CH SET... : Set values for each individual channel.
MATRIX...: Set the data area for each individual
channel when CH SET is selected. k[A2]
PRESET
CH SET
MONITOR ADDRESS A1321
FILE NAME A1331
Level 5
PRESET
CH SET
PRESET
CH SET
(continued)
21