Preset Adjustment Of The Picture Level Control Knobs - Control Preset Adj Menu; Structure And Usage Of The Control Preset Adj Menu - Sony BVM-14F5U Operation Manual

Preset Adjustment of the Picture Level Control
Knobs — CONTROL PRESET ADJ Menu
The preliminary adjustment of contrast, brightness,
chroma, and phase are carried out with the CONTROL
PRESET ADJ menu to set the preset values to the
knobs for the above-mentioned adjustments. Preset
values can be set either commonly to all channels or
separately for individual channels.
Preset values can be set in the following ways:
(1) Adjustment with the MANUAL knobs

Structure and Usage of the CONTROL PRESET ADJ Menu

This section explains the setting lists displayed in the
menu. .
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a 3-digit number. These numbers are not
displayed on the screen.
• Setting lists are indented to indicate their position in
the tree structure of the menu. (When list YYY is
found under list XXX, it is indented to the right of
list XXX.)
• The arrow mark (÷) refers you to another setting
list that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, you can make the
setting using a single list.
Select CONTROL PRESET ADJ from the menu list.
CONTROL PRESET ADJ... ÷ 100
COLOR TEMP ADJ...
SET UP...
MEMORY CARD...
COPY...
STATUS...
MAINTENANCE...
KEY PROTECT OFF
Menu list
100
CONTROL PRESET ADJ menu: Select either PRESET or CH SET. ÷ 101
PRESET...: Set common values.
CH SET...: Set values for each individual channel.
101
CONTROL PRESET ADJ (PRESET/xxCH): Select the setting method.
MANUAL...: Set with the MANUAL knobs. ÷ 110
AUTO...: Set by automatic adjustment. ÷ 120
COPY...: Copy data from elsewhere. ÷ 130
22
(2) Automatic adjustment (An external color bar signal
is necessary.)
(3) Copying data from other channels, common data,
other BVM-series monitors that have been
connected via the serial remote connector, or from
data stored in monitor memory cards
(4) Restoring factory settings.