Menu Structure; A Preset Adjustment Of The Picture Level Control Knobs - Sony TRINITRON BVM-D9H1U Maintenance Manual

Color video monitor chassis no. scc-p31c-a; scc-g10d-a; scc-g09f-a; scc-p31f-a; scc-g10g-a; scc-g09g-a
Hide thumbs Also See for TRINITRON BVM-D9H1U:
Table of Contents

Advertisement

Menu Structure

Menus consist of one to three levels.
Detailed information on the levels of menus is
described at the top of explanation of each menu.
Main Menu
A
CONTROL PRESET ADJ menu
Sets the preset values for the input signal's chroma, contrast,
phase, and brightness. (page 31(E))
B
COLOR TEMP ADJ menu
Sets the color temperature. (page 33(E))
C
INPUT CONFIG menu
Sets the input channel. (page 35(E))
D
Sets the remote control functionality. (page 37(E))
REMOTE menu
E
SYSTEM CONFIG menu
Sets the power-up conditions and data about the screen display.
(page 39(E))
F
Displays the information about the monitor or options installed in
STATUS menu
the monitor. (page 42(E))
G
ALIGNMENT menu
Adjusts the position, size and geometry of the picture. (page
43(E))
30
(E)
Functions
A
Preset Adjustment of the Picture Level Control
Knobs — CONTROL PRESET ADJ Menu
Overview
The preliminary adjustments of chroma, phase,
contrast and brightness are carried out with the
CONTROL PRESET ADJ menu to set the preset
values to the knobs for the above-mentioned
adjustments.
Structure of the CONTROL PRESET ADJ Menu
Level 1
Level 2
MANUAL A1
CHROMA
PHASE
CONTRAST
BRIGHT
FULL FIELD WHITE 100%
AUTO A2
8COLOR BAR 100%
8COLOR BAR 75%
SMPTE COLOR BAR
EIA COLOR BAR
Setting Lists in the CONTROL PRESET ADJ Menu
This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a menu number. These numbers are not
displayed on the screen.
For more information about the menu number, see "About
menu numbers" on page 26(E).
Preset values can be set in the following two ways:
• Adjustment with the MANUAL adjustment knobs
(MANUAL menu)
• Automatic adjustment (AUTO menu)
An external color bar signal is necessary.
Note
After installing the optional board, carry out AUTO
adjustment.
• The arrow mark (÷) refers you to another setting list
that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, the menu does not have
any sub-list.
31
(E)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents