Engine Oil - KTM 990 ADVENTURE Owner's Manual

TECHNICAL SPECIFICATIONS – ENGINE
ENGINE
Mixture preparation
Ignition system
Ignition timing
Generator
Spark plug
Electrode distance
Cooling system
Cooling liquid
Starting aid
#
JASO T903 MA
TEMPERATURE
0°C
32°F
5W/40

Engine oil

Only use fully synthetic engine oils that meet the JASO MA quality requirements (see infor-
mation on the can).
KTM recommends Motorex Power Synt 4T in the 10W/50 viscosity (for temperatures over
0°C, 32°F) or 5W/40 (for temperatures under 0°C, 32°F).
990 LC8
EFI (electronic fuel injection)
breakerless transistorized electronic ignition system with digital ignition advance
Map-controlled via TPS
12V 450W at 6000 rpm
NGK DCPR 8 E
0.8 mm
liquid cooled, permanent circulation of cooling liquid through water pump
2.1 liters, 50% antifreeze, 50% distilled water, at least –25° C
0.9 kW electric starter
10W/50
»
*
PON / CLC
87
91 Premium 95
PON = Pump Octane Number
CLC = Cost of Living Council
RON = Research Octane Number
ROZ = Research Oktan Zahl
MON = Motor Octane Number
95
RON / ROZ MON
91 83
87