Removing And Remounting The Seat; Tool Set - KTM 990 ADVENTURE Owner's Manual

»
MAINTENANCE WORK ON CHASSIS AND ENGINE
41

Removing and remounting the seat

Insert the ignition key in the seat lock and turn in a counterclockwise direction to unlock
the seat. Lift the back of the seat and pull off towards the rear.
To remount, fit the nose [1] of the seat in the front, lower the back while pushing towards
1
the front. Both noses [2] should fit into the frame. Insert the catch bolts [3] in the lock hous-
3
ing and push the seat down in the back until you hear the catch bolts snap into place.
2
Check whether the seat is correctly mounted.
If not correctly mounted, the seat can slip while you are driving and cause you to lose con-
trol of your motorcycle.

Tool set

The tool set [4] and an extension piece [5] for some of the wrenches in the tool set are
5
located in the pocket under the seat.
4
The 990 Adventure S model (without ABS) has an additional storage compartment under
6
the cover [6].