Switch Settings; Lcd Panel Switch - NEC Versa Sxi Series Service And Reference Manual

Switch Settings

A set of four dip switches is located on the main board. The following list identifies each switch
setting and its function.
Switch 1 — Keyboard select; Default is "ON" for U.S. 85 key keyboard
!
Switch 2 — Keyboard select; Default is "OFF" for U.S. 85 key keyboard
!
Switch 3 — Logo select; Default is "OFF" for U.S.
!
Switch 4 — Password Override Switch; Default is "OFF." If you forget your password and
!
cannot access the data on your NEC Versa, change the setting to "ON" to erase your current
password.

LCD Panel Switch

Remove the LCD panel switch as follows.
Remove the keyboard, heatplate, and top cover.
1.
Disconnect the LCD panel switch cable from connector CN8 on the main board.
2.
Locate and remove the screw securing the LCD panel switch.
3.
Remove the LCD panel switch.
4.
Switch settings
Removing the LCD panel switch screw
A – Screw
Disassembly and Reassembly 3-19