Ac Adapter; Connecting The Ac Adapter; Powering On Your System - NEC Versa Sxi Series Service And Reference Manual

Power Sources for Your NEC Versa
The NEC Versa can be powered using two different sources, making it a truly portable system.
Operate your NEC Versa just about anywhere using one of the following power sources:
the AC adapter connected to an electrical wall outlet (using AC power)
!
the optional Auto adapter. (For details about its use, refer to the accessory sheet that ships
!
with this option.)
Read the following sections for specific information about using the NEC power sources.

AC Adapter

Use the AC adapter and power cable that came with your NEC Versa to run your computer on
alternating current (AC) power, or to recharge the battery pack. Use the AC adapter whenever a
wall outlet is nearby.
Keep the adapter connected whenever possible. The AC adapter charges the battery when it is
connected, whether the NEC Versa is powered on or off.
user-replaceable or serviceable parts inside. Dangerous voltage in the AC adapter can cause
serious personal injury or death. The AC adapter is intended for use with a computer and must
meet EN609050 standards.

Connecting the AC Adapter

Note
The AC power cable type that your system uses depends on the country where you are
using it. Contact the local dealer to purchase the correct power cable.
Connect the AC adapter as follows:
Connect the AC adapter cable to the power port on the back of your NEC Versa.
1.
Plug one end of the AC power cable into the AC adapter and the other end into a properly
2.
grounded 120- or 240-volt wall outlet.
clear of objects lets the adapter cool properly during use.
Only use the AC adapter that comes with your NEC Versa SXi. Although other adapters look
similar, using them can damage your system.

Powering On Your System

Power on the system as follows:
Locate the latches on the left and right side of the LCD panel, slide them toward the front of
1.
the system, and raise the panel.
Locate and press the Power button to turn on system power.
2.
2-2 System Configuration and Setup
Do not attempt to disassemble the AC adapter. The AC adapter has no
Do not cover or place objects on the AC adapter. Keeping the adapter