Engine Oil - KTM 950 SUPER ENDURO R 950 Owner's Manual

TECHNICAL SPECIFICATIONS – ENGINE
ENGINE
Ignition system
Ignition timing
Generator
Spark plug
Electrode distance
Cooling system
Cooling liquid
Starting aid
JASO T903 MA
TEMPERATUR
0°C
32°F
5W/40 10W/50

Engine oil

Only use fully synthetic engine oils that meet
the JASO MA quality requirements (see infor-
mation on the can).
KTM recommends Motorex Power Synt 4T in
the 10W/50 viscosity (for temperatures over
0°C, 32°F) or 5W/40 (for temperatures under
0°C, 32°F).
950 LC8
breakerless transistorized electronic ignition system with digital ignition advance
5° BTDC at 1200 rpm
12V 450W at 6000 rpm
NGK CR 8 EK
0.7 mm
liquid cooled, permanent circulation of cooling liquid through water pump
2.1 liters (0.55 USgal), 50% antifreeze, 50% distilled water, at least –25° C
0.9 kW electric starter
#
BASIC CARBURETOR SETTING
Type of carburetor
Main jet
Main air jet
Idling jet
Idle air jet
Idle air cutoff jet
Jet needle
Needle position
Mixture control screw open
Starting jet
*
PON / CLC
87
91 Premium 95
»
CVRD 43
155 (front) / 160 (rear)
40
42
50
80
NDFB
2nd from top
2 1/4 turns
68
RON / ROZ MON
91 83
87
PON = Pump Octane Number
CLC = Cost of Living Council
RON = Research Octane Number
ROZ = Research Oktan Zahl
MON = Motor Octane Number
80