Troubleshooting - KTM 950 SUPER ENDURO R 950 Owner's Manual

TROUBLESHOOTING

If you let the specified maintenance work on your motorcycle be carried out, disturbances can hardly be expected. Should an error occur
nevertheless, we advise you to use the trouble shooting chart in order to find the cause of error.
We would like to point out that many operations cannot be performed by oneself. In case of uncertainty, please contact a KTM-dealer.
TROUBLE
Engine does not start when the
starter button is actuated
The engine cranks only with pulled
clutch lever
Engine cranks with gear engaged.
»
CAUSE
Operating errror
Discharged battery.
Blown fuse IGNITION.
Blown main fuse.
Defect ignition lock
Defect safe-starting system.
A gear is engaged
A gear is engaged and the side
stand is still folded down
Defect safe-starting system.
Defect safe-starting system.
REMEDY
Turn on the ignition, switch the gear to neutral
Recharge the battery and investigate the causes for discharg-
ing; contact an authorized KTM workshop.
Replace fuse IGNITION
Remove the seat and replace the main fuse in the starter relay
Check ignition lock, contact an authorized KTM workshop.
Contact an authorized KTM workshop.
Shift the transmission to neutral.
Shift the transmission to neutral.
Contact an authorized KTM workshop.
Contact an authorized KTM workshop.
68