Table of Contents
Advertisement
management
---------------------------
add
Syntax:
Usage:
set [<name> <value>] [<vid> <value>] [<ip> <value>] [<port> <value>]
[<type> <value>] <action> <value>
Synopsis: set name Mary vid 20 ip 192.168.1.1-192.168.1.90 port 2-5,8
type h,s action a
Synopsis: set name Mary vid 20 ip 192.168.1.1-192.168.1.90
Description:
To save the adding management policy records.
When you don't know how to set the management policy records, you can use this
command as follows:
FEL2SW-26 (management-add)# set
This command will show exhaustive operating explanation for setting the
management policy records.
Argument:
[<name> <value>]
[<vid> <value>]
[<ip> <value>]
[<port> <value>]
[<type> <value>]
<action> <value>
Possible value:
[<name> <value>]
[<vid> <value>]
[<ip> <value>]
[<port> <value>]
[<type> <value>]
<action> <value>
Example:
FEL2SW-26(management-add)# set name Mary vid 20 ip 192.168.1.1-
192.168.1.90 port 2-5,8 type h,s action a
FEL2SW-26(management-add)# show
#: 1
Name : Mary
Type : Http,SNMP
207
ACL entry name.
VLAN ID.
IP range.
Incoming port.
Access type.
a(ccept) or d(eny).
No default and it must be set.
The range is 1-4095 and can be set to any.
For example, 192.168.1.90-192.168.1.90 or any.
For example, 1 or 1-8 or 1,3-5 or any
For example, h(ttp),s(nmp),t(elnet) or any.
No default and it must be set.
VlanID : 20
Action : Accept
IP : 192.168.1.1-192.168.1.90
Port : 2,3,4,5,8
Advertisement
Table of Contents
